Fence installation cost in Atlanta, GA
Tell us about your fence installation project in Atlanta, Georgia. Include the ZIP code and scope; we look for an independent provider for your address.
Typical price ranges
HomeGuide puts professional fence installation at $20 to $60 per linear foot, or about $4,000 to $12,000 for a 200-foot fence. Material, height, gates and ground conditions move the price the most.
- Installed, all materials: $20–$60 per linear foot
- Typical 200-foot fence: $4,000–$12,000
- Wood: $20–$50 per linear foot
- Vinyl: $30–$60 per linear foot
- Chain-link: $10–$40 per linear foot
- Aluminum: $25–$75 per linear foot
- Wrought iron: $50–$85 per linear foot
- Fence replacement (removal plus new fence): $30–$80 per linear foot
- Old fence removal only: $10–$20 per linear foot
- Permit, where required: $40–$150
- Property survey, if lines are unclear: $200–$1,200
Source: HomeGuide, Fence Installation Cost, updated February 3, 2026, accessed October 29, 2026. National averages, not a quote; your price depends on your project. HomeGuide, Fence Installation Cost
Local labor costs in Atlanta
The U.S. Bureau of Labor Statistics reports a May 2025 median wage of $21.80 an hour for fence erectors in the Atlanta metro area, 6% below the national median of $23.07. Labor is a large part of these jobs, so local wages are one reason quotes here can differ from the national ranges.
BLS Occupational Employment and Wage Statistics, Atlanta metro area (SOC 47-4031)
Local rules and tips for Atlanta
In Atlanta's R-1 through R-5 residential districts, fences can be up to 4 feet in the required front yard and up to 6 feet in side and rear yards, and fences near street intersections have a lower limit. The City of Atlanta requires a building permit for a new or replacement fence, so ask who pulls it and whether it is in the price.
Atlanta zoning code §16-28.008
For a project in Atlanta, Georgia, describe the property and access from nearby Decatur or Smyrna. Include photos of the actual work area so a provider can review your request.
Hiring in Georgia: license and permit checks
Georgia’s Secretary of State runs the residential and general contractor licensing board; specialty occupations such as roofers, painters, drywall contractors and repair handymen are generally exempt from that state license. Plumbers, electricians and air-conditioning contractors have a different board, and many contractors also need city or county licensing; check the requirements for your scope.
Ask the provider for the license or registration number if their trade requires one, and ask about insurance. Confirm city or county permits with the local building department and get a written scope of work.
What changes the price
- Total length and height: an 8-foot privacy fence costs more per foot than a 4-foot picket fence.
- Material and style: chain-link is usually the cheapest, wrought iron the most expensive.
- Gates: each walk or drive gate adds hardware and labor.
- Ground: rock, roots, slopes and hard soil slow down post holes.
- Removal and haul-away of an old fence.
- Permits, HOA approval and, if needed, a survey to confirm property lines.
How to choose a provider
- Get at least three written quotes that list the same scope, materials and cleanup.
- Check the license (where your state requires one) and ask for proof of liability insurance.
- Ask who pulls the permit and whether the permit fee is in the price.
- Agree on a payment schedule tied to finished work; avoid paying most of the price up front.
- Get the warranty for labor and materials in writing.
Red flags
- Cash-only deals or pressure to sign the same day.
- No written contract, no address and no proof of insurance.
- A price far below every other quote with a vague scope.
- Door-to-door offers right after a storm from crews you cannot verify.
Services in Atlanta
Other areas
Fence installation cost guides
What fence usually costs, with sourced price ranges and local rules.
Get a local quote
Border Quotes is a referral service, not a contractor. Send your project and ZIP code; we look for an independent local provider who can quote it. This service is new, so we cannot promise availability, and we tell you if we cannot find one.
FAQ
How much does fence cost in Atlanta?
HomeGuide puts professional fence installation at $20 to $60 per linear foot, or about $4,000 to $12,000 for a 200-foot fence. Material, height, gates and ground conditions move the price the most. The U.S. Bureau of Labor Statistics reports a May 2025 median wage of $21.80 an hour for fence erectors in the Atlanta metro area, 6% below the national median of $23.07. Labor is a large part of these jobs, so local wages are one reason quotes here can differ from the national ranges.
Are there local rules for fence in Atlanta?
In Atlanta's R-1 through R-5 residential districts, fences can be up to 4 feet in the required front yard and up to 6 feet in side and rear yards, and fences near street intersections have a lower limit. The City of Atlanta requires a building permit for a new or replacement fence, so ask who pulls it and whether it is in the price.
Which license and permit checks apply in Georgia?
Georgia’s Secretary of State runs the residential and general contractor licensing board; specialty occupations such as roofers, painters, drywall contractors and repair handymen are generally exempt from that state license. Plumbers, electricians and air-conditioning contractors have a different board, and many contractors also need city or county licensing; check the requirements for your scope. Ask the provider for the license or registration number if their trade requires one, and ask about insurance. Confirm city or county permits with the local building department and get a written scope of work.
How much does a new fence cost?
HomeGuide reports $20 to $60 per linear foot installed, or about $4,000 to $12,000 for 200 feet. Your quote depends on material, height, gates and site conditions.
Do I need to call 811 before a fence is installed?
Yes. Call 811 a few business days before digging so buried utility lines are marked. Many contractors make the request, but confirm who is doing it.
Is it cheaper to repair or replace a fence?
Repairs make sense when only a few posts, pickets or panels are damaged. If posts are rotting along the whole run, replacement is usually the better value.